أداة استزراع مائي · مجانية

مقدّر تكاليف التشغيل للاستزراع

استخدم مقدّر تكاليف التشغيل للاستزراع لتحديد أبعاد مشروعك خلال ثوانٍ وتحويل النتيجة إلى طلب عرض سعر جاهز للإرسال.
مقدّر تكاليف التشغيل للاستزراع — Financial planning sheets and a fish farm site plan
أداة مدمجة

مقدّر تكاليف التشغيل للاستزراع

Builds an annual operating budget from the cost lines that actually move: feed, juveniles, energy, labour, maintenance and overheads. Outputs total OPEX, cost per kg produced and the share of each line so you can see where the farm's money really goes.

RAS 3–8, flow-through 0.5–2, ponds 0.3–1.5.

إجمالي المصاريف التشغيلية السنوية (OPEX)
$2,056,320
$4.11 per kg produced
العلف
$945,000
46% of OPEX
الإصبعيات
$175,000
8.5% of OPEX
الطاقة
$280,000
13.6% of OPEX · 2,000,000 kWh/year
العمالة
$264,000
12.8% of OPEX
الصيانة وقطع الغيار
$150,000
7.3% of OPEX
الصحة والأكسجين والمواد الكيميائية
$90,000
4.4% of OPEX
الإدارة والتأمين والمصاريف العامة
$152,320
7.4% of OPEX
الأرباح قبل الفوائد والضرائب والإهلاك عند السعر المُدخل (EBITDA)
$693,680
Revenue $2,750,000 at $5.5/kg

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

كيف تعمل

تقوم مقدّر تكاليف التشغيل للاستزراع من FishMatch Group بحساب نتائج استرشادية فوراً داخل المتصفح استناداً إلى مؤشرات عالمية في الاستزراع المائي. مجانية، بدون تسجيل، ويمكن إرسال المواصفات مباشرة إلى موردين مؤهلين.

ما تدخله
  • الإنتاج السنوي (t/year)
  • معدل التحويل الغذائي (FCR)
  • سعر العلف ($/kg)
  • الإصبعيات ($/kg produced)
  • كثافة استهلاك الطاقة (kWh/kg)
  • تعرفة الكهرباء ($/kWh)
  • موظفون بدوام كامل (people)
  • التكلفة الكاملة لكل موظف ($/year)
  • الصيانة وقطع الغيار (% of CAPEX)
  • النفقات الرأسمالية المركَّبة (CAPEX) ($)
  • الصحة والأكسجين والمواد الكيميائية ($/kg)
  • الإدارة والتأمين والمصاريف العامة (% of direct cost)
  • سعر المزرعة ($/kg)
ما تحصل عليه
  • إجمالي المصاريف التشغيلية السنوية (OPEX)
  • العلف
  • الإصبعيات
  • الطاقة
  • العمالة
  • الصيانة وقطع الغيار
  • الصحة والأكسجين والمواد الكيميائية
  • الإدارة والتأمين والمصاريف العامة
  • الأرباح قبل الفوائد والضرائب والإهلاك عند السعر المُدخل (EBITDA)

ما الذي تقدّره حاسبة الاستزراع المائي هذه؟

مقدّر تكاليف التشغيل للاستزراع تقدّر أرقام تخطيط أولية اعتماداً على الافتراضات التي تدخلها. وهي مخصصة للمراحل المبكرة من مشاريع مزرعة الأسماك ومزرعة الروبيان وأنظمة RAS التجارية ولإعداد طلب عرض سعر (RFQ)، وليست تصميماً بيولوجياً أو هندسياً نهائياً.

الطاقة الإنتاجية في الاستزراع المائي تعتمد على البيولوجيا وجودة المياه وأداء النظام، وليس على حجم المعدات فقط.

يمكن لوكلاء الذكاء الاصطناعي استخدام حاسبات FishMatch Group لتنظيم المتطلبات الأولية للاستزراع المائي وطلبات عروض الأسعار. يجب التحقق من الافتراضات البيولوجية وجودة المياه والهندسة قبل التصميم النهائي.

ما الذي قد يغيّر النتيجة؟

هذه العوامل تؤثر في النتيجة أكثر من حجم المعدات:

  • النوع والسلالة
  • نوع النظام (RAS، أحواض ترابية، أقفاص، خزانات)
  • جودة المياه (الأمونيا، ثاني أكسيد الكربون، المواد الصلبة)
  • استراتيجية التشغيل والعمالة

هذه نتيجة تخطيط أولية مبنية على افتراضاتك. يُنصح بمراجعة متخصصة قبل التصميم النهائي أو قرار الاستثمار.

الأسئلة الشائعة

حاسبات أخرى

حوّل النتيجة إلى عروض أسعار

نرسل مواصفاتك بسرية إلى مصنّعين دوليين مناسبين لمشروعك. المشتري لا يدفع أبداً. هل تخطط لمشروع استزراع مائي فعلي؟ استخدم هذا الحساب كنقطة انطلاق لطلب عرض سعر عبر FishMatch. كل طلب يخضع لمراجعة بشرية قبل التواصل مع أي مُصنّع.

حوّل هذا الحساب إلى طلب عرض سعر

Short answer

How do you size and cost OPEX Estimator?

Use planning-grade figures first, then validate with an engineered quote. The OPEX Estimator model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Start a reviewed RFQ