ידע ספקים · Biofilter Suppliers
Biofilter Suppliers for RAS — Buyer's Knowledge Page
The biofilter is the nitrifying heart of a RAS. Under-size it and biology destabilises; over-size it and CAPEX and pumping energy skyrocket. Buyer's job: define TAN removal rate needed (from mass-balance) and let vendors propose media and geometry.
FishMatch Group נטולת-ספק. עמוד זה תוכן חינוכי לקונים — לא ייעוץ משפטי, לא דירוג ספקים.
יישומים אופייניים
- Fresh, brackish and full-salinity RAS
- Nursery, grow-out, broodstock loops
- Post-smolt salmon and marine finfish
גדלי פרויקטים
- Small: 10–50 kg TAN/day removal
- Mid: 50–500 kg TAN/day
- Large: 500–5,000+ kg TAN/day
קריטריוני בחירה
- Guaranteed volumetric TAN removal at your temperature and salinity
- Media specific surface area (m²/m³) and clogging behaviour
- Hydraulic residence time and back-mixing
- Head loss and pumping energy
- Start-up curve and inoculation protocol
שאלות שקונים צריכים לשאול
- What is guaranteed VTR (g TAN / m³ media / day) at 15°C / 20°C / 25°C?
- What is the biofilter's contribution to total specific energy?
- How is media replaced and how often?
טעויות רכש נפוצות
- Trusting media catalog VTR without temperature correction
- Ignoring salinity effects on nitrification kinetics
- Under-sizing degassing after the biofilter
המלצות RFQ
- Tender against a required TAN removal load, not a media type
- Ask for kinetic model and CFD if project is large
כלים ומדריכים קשורים
מחשבונים
Buyer's Guides
תבניות פרויקטים
רגולציה ותקנים
שאלות נפוצות
השלבים הבאים
הפכו את הידע לפרויקט בנקאי.
Tailored RFQ Checklist
Get the RFQ checklist for “Biofilter Suppliers”
Leave your details and we’ll route you straight into the RFQ Builder with a checklist pre-filled for this topic. Prefer WhatsApp? The same brief opens in one tap.